The 5 Best Glue For Magnets 2022 – Review, Top Picks & Buyer’s Guide

When it comes to DIY and home improvement projects, there are many reasons why you should glue magnets and metal together. But, most people aren’t aware of the best glue for magnets.

Two-part epoxy, Gorilla glue as well as liquid nails, and any sort of silicone adhesive, are the finest types of glue for gluing magnets on other surfaces.

At Glue Care, we have compiled some of the best recommendations right here to assist you with a similar chore. Continue reading for a fast and easy guide to choose the finest adhesive for your needs.

Our Top Picks: Best Glue For Magnets

You’ll need the correct sort of adhesive to adhere a magnet to other surfaces. Two-part epoxy and super glue are the best glues for magnets and plastic.

Continue reading for a step-by-step method to determine which product will aid you in your future creative activities.




Gorilla 2 Part Epoxy

  • Net Wt: 2.1 fl oz Bonds: Wood, glass, ceramic, plastic, metal Color: Clear

Loctite Epoxy Five Minute Instant

  • Net Wt: 0.47 fl oz Bonds: Metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete, stone Color: Translucent amber

Loctite Ultra Gel Control Super Glue

  • Net Wt: 14 fl oz Bonds: Wood, ceramic, paper, leather, plastic, metal, rubber Color: Clear

Weldbond 8-50420 Adhesive Glue

  • Net Wt: 14.2 fl oz Bonds: Brick, glass, metal Color: White

PASCOFIX Strongest Super Glue

  • Net Wt: 0.7 fl oz Bonds: Wood, glass Color: Clear

The Best Glue For Magnets Reviews Of 2022

Fortunately, you won’t have to hunt far for the correct sort of adhesive for any future magnet projects. As a consequence of our thorough investigation, we’ve compiled a list of the finest glues for this purpose.

1. Gorilla 2 Part Epoxy- Best For Neodymium Magnets

Gorilla 2 Part Epoxy
Buy on Amazon

Important Specifications

  • Net Wt: 2.1 fl oz
  • Bonds: Wood, glass, ceramic, plastic, metal
  • Color: Clear

Product highlights

If you are looking for a super-strong epoxy adhesive, Gorilla 2 Part Epoxy is your perfect bonding aid! It is very convenient to use it.

This strong glue comes in two simultaneously squeezed-out tubes. Since the glue is toxic, remember to mix two tubes at once.

The good news is that the components are easy to mix, the adhesive does not have an unpleasant odor, and the kit includes a spatula.

Before use, it is necessary to mix the components with nine portions of epoxy to 1 portion of hardener. First, you need to understand how important surface preparation is. Clean the magnet surface and degrease for the best sticking.

Since the product is made of resin, you will be happy with the result of your gluing work very soon. It dries in 3 minutes, so get ready to get the job done quickly.

It hardens quickly and connects parts securely to reanimate things. Also, it’s suitable for handling chips and cracks. Don’t be surprised if the glued part is stronger than the new one.

It boasts several positive characteristics: moisture and frost resistance and excellent adhesion. Epoxy glue sets instantly and has increased moisture resistance.

So you can work with it in places where it is impossible to avoid water ingress. The product also has a transparent consistency, so you can not be afraid of leaving behind stains.

This adhesive is popular among people in everyday life. But, it emits a strong odor. So after work, it is advisable to ventilate the room.

What We Like

  • Gel formula with a twist
  • Create bonds in 10 seconds.
  • Include a clog-proof cap.
  • It is resistant to water and has an effect.
  • You may utilize it both inside and outside.

Thing to Consider

  • When wet, the fragrance is really strong.
  • Not bond to certain polymers.

Bottom line

Gorilla epoxy easily bonds magnets to steel, Aluminum, glass, wood, ceramics, tiles, and most plastics. But, it takes a certain amount of time for the adhesive before it hardens.

2. Loctite Epoxy Five Minute Instant – Best For Multi-Surface

Loctite Epoxy Five Minute Instant
Buy on Amazon

Important Specifications

  • Net Wt: 0.47 fl oz
  • Bonds: Metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete, stone
  • Color: Translucent amber

Product highlights

Loctite Epoxy Instant Mix 5 Minute gives you amazing bonding strength with surfaces of metal, glass, ceramic, and more. The product consists of two components: resin and hardener contained in two separate tubes.

Its biggest advantage is the included self-mixing tool. The dual syringe is compact enough to control the application easily without a mess.

It has a long and small tip to access hard-to-reach places. When you press with the pumper, the hardener will simultaneously enter the static mixer nozzle and blend to form a homogeneous mixture.

Take care to control the force of your thumb to ensure you are extracting equal volumes. Then, bring the tip of the nozzle to the starting point of the track.

You will want to move the syringe to form a straight gel line. Continue to press your thumb against the pumper during the movement.

When you finish running, check the evenness of the glue line to fill in defects promptly. It is also a good time to wipe off excess gel.

Leave your project alone for 5 minutes. You will then see a strong bond forming at the position you just dealt with.

This bond is hard and durable, has no shrinkage, and is resistant to water and common solvents. But, we do not recommend using it for polypropylene, polyethylene, nylon, Teflon, and continuous water immersion.

What We Like

  • Consistent mixture
  • Quick-drying
  • Waterproof
  • No shrinkage
  • Convenient mix syringe

Thing to Consider

  • Not suitable for wet places

Bottom line

Loctite Instant Mix is ​​a two-component epoxy consisting of resin and hardener. When mixed in equal amounts, the resin and hardener react, forming a hard, highly elastic bond after one hour of application.

3. Loctite Ultra Gel Super Glue – Best For Gluing Magnets To Wood

Loctite Ultra Gel Super Glue
Buy on Amazon

Important Specifications

  • Net Wt: 14 fl oz
  • Bonds: Wood, ceramic, paper, leather, plastic, metal, rubber
  • Color: Clear

Product highlights

Today, cyanoacrylate glue is increasingly used to join glass fragments, plastic, rubber, and even metal parts. It is also called “superglue”.

It’s great that we have an amazing super adhesive: Loctite Ultra Gel Control. Why has this adhesive quickly become popular and in demand today?

This Loctite super glue is resistant to shock, vibration, and extreme temperatures. All this is possible thanks to the thickness of its formula, which corresponds to a thicker bond.

These features allow it to work with almost all materials you know. We have personally tested it on magnet-to-wood, magnet-to-ceramics, and other porous surfaces.

While we needed to roughen the surface of some of the smooth materials we tried, it still gave us a solid bond every time we used it. Its colorless consistency can do practically everything needed in everyday life and production.

Everything is simple. After drying, it is resistant to alcohol, gasoline, engine oil, and freon.

But, Loctite adhesive has a low level of toxicity. However, it can cause allergic reactions in people with hypersensitivity. Therefore, wearing gloves when working with this compound in a ventilated area.

What We Like

  • Durable bond.
  • Suitable for the magnet to metal, rubber, ceramics, wood, leather, paper, and some plastics.
  • Side squeeze design for excellent control with every use with no clamps required.
  • Dry transparently and provide a neat appearance.
  • When applied, the gel does not drip or spread.
  • Install in one minute.
  • Resistant to moisture.

Thing to Consider

  • Small capacity

Bottom line

Loctite gel control is an instant adhesive with superior performance to conventional adhesives. Because of its revolutionary additive technology, this compound works faster and holds stronger on more surfaces than traditional instant adhesives.

4. Weldbond 8-50420 Multi-Purpose – Best For Non-Toxic

Weldbond 8-50420 Multi-Purpose
Buy on Amazon

Important Specifications

  • Net Wt: 14.2 fl oz
  • Bonds: Brick, glass, metal
  • Color: White

Product highlights

WeldBond is a universal adhesive that works quickly and is more than simply a terrific glue. Weldbond is a highly concentrated sealant that may stick to various surfaces.

It will connect cement, concrete, bricks, plaster, metal, glass, wood tiles, construction panels, and much more to whatever WeldBond can practically weld together.

You can also use WeldBond as a general-purpose primer for porous surfaces. It is non-staining and will not brittle with age after curing.

But, the thing we dislike about this particular bottle is that it’s hard to open the lid. If you haven’t used it for a while, it does get stuck, and you can’t lift the cap. ​

So, you can get your pliers out to lift it. And that’s where you will find this a little bit difficult to use because of the stuck glue around the nozzle.

Now, we have a solution. All you need to do is put the glue into a little applicator. It’s the easiest way to use the WeldBond. It doesn’t ooze out quickly.

By squeezing the applicator, you can push the gel out and spread it on the surface to which you want to glue the magnet. Place the neodymium magnets onto that surface, and you get around one hour for bond-forming.

Another important thing you have to mind is not using this compound outside unless under protection. It means you have to use a waterproof grout on the instruction for a WeldBond. If you immerse WeldBond into the water, it will soften and come off.

What We Like

  • non-toxic
  • odorless
  • dense consistency transparent
  • thick gel
  • not turn yellow

Thing to Consider

  • not suitable for washable objects
  • not compatible with plastic surfaces

Bottom line

Weldbond 8-50420 Multi-Purpose is a good adhesive to use. It’s non-toxic, making it great for kids and beginners. For application, we give it 10 out of 10. For cleaning up, it’s really easy to wash it off just with water.

The other great thing is that it does dry clear. It might take a while, but it will dry clear with no mess.

5. Pascofix Crazy Glue – Best For Instant Bond

Pascofix Crazy Glue
Buy on Amazon

Important Specifications

  • Net Wt: 0.7 fl oz
  • Bonds: Wood, glass
  • Color: Clear

Product highlights

PASCOFIX overcomes the drawbacks of traditional adhesives, including poor bonding and weak bond.

On one of the components, apply a thin coating of PASCO. It usually just needs a single drop of adhesive! For 5 to 10 seconds, press the components together.

When working with the adhesive, always use rubber gloves. If fingers come into touch with the glue, they will attach extremely rapidly.

After applying the adhesive, a bond will form almost immediately. You can watch some examples in the video we left at the end of this review.

If you try it, you will find it resistant to water, heat, and cold. The powerful bond can withstand temperatures ranging from 250°F to -110°F.

The only thing that you have to refrigerate is the blue bottle. You may keep the powder at room temperature for a long time.

Before storage, squeeze any residue out of the nozzle. It’s recommended to keep the bottle upright to prevent the nozzle from becoming blocked inside and wipe any remaining glue off the nozzle’s exterior to prevent the cap from sticking to the nozzle. If you follow the instructions above, you will keep the item for more than two years.

The only thing we don’t like is that this duo generates ugly residues. Because the adhesive powder is insoluble in the liquid glue, it produces rough white build-ups where you apply it.

What We Like

  • suitable for multi-purpose gluing
  • To compete with all items, use cyanoacrylate substances.
  • Work on automobile repairs flawlessly.
  • The strength of glue binding is comparable to that of welding.
  • Resistant to water, heat, and cold.

Thing to Consider

  • ugly residue
  • There is no pin linked to a stick.
  • There is no anti-clog cap.

Bottom line

PASCOFIX is the strongest metal-to-metal adhesive when compared to Gorilla glue. You may use it to attach any material, including glass, wood, and metal.

The components of this adhesive are virtually compatible with most people. It’s simple to use, and the adhesive dries quickly.

Learn about the different uses of this product in the following video:

How To Choose An Adhesive For Neodymium Magnets?

The method of attaching a magnet to a metal surface is rather straightforward as long as you make the appropriate actions and employ the right materials.

To avoid making some of the typical mistakes that new DIYers make when attaching neodymium magnets to metal, you need an adhesive specifically designed for this material. Have a look at our handy list of suggested adhesives that are suitable for any magnet.

The best magnet adhesives are:

Because different types of magnets contain different chemical components, certain types of glue used in DIY projects may react negatively.

The varieties of adhesive indicated above, on the other hand, are typically safe to use on any magnet. Two-part epoxy is the best adhesive to search for attaching magnets to metal. This adhesive is the best for these applications because of its strength and endurance.

If you don’t have access to this precise sort of adhesive, Gorilla glue, crazy glue, super glue, liquid nails, or any other type of liquid silicone adhesive can help. Make sure you don’t use hot glue to avoid damaging the magnetic properties.

All of these adhesive brands and types are strong and long-lasting, ensuring that the magnet remains firmly attached to the surface of your choice for a long time.


What Is The Finest Magnet Glue To Use?

Two-part epoxy, Gorilla glue, super glue, liquid nails, and any silicone adhesive are the finest types of glue for magnets on metal. Remember that hot glue can damage most types of magnets.

What Is The Best Way To Get Metal To Stick To A Magnet?

Epoxy or contact cement is the finest option. You might also connect a piece of ferrous metal to the back of it. Through the Aluminum, use the magnet to go through time.
If it is thin enough, you might place an iron object on the other side of the Aluminum sheet, and the magnet would appear to adhere to the Aluminum.

Is It Possible To Glue Magnet On Wood?

One of the best ways to glue magnets and wood is a two-part epoxy. You may use super glue and silicone adhesives to help you finish your magnet projects.

Is Magnetic Glue Available?

Magnetic adhesives are increasingly becoming common to connect smoke detectors. Tinkerers have long been fond of gluing.
You can use the magnetic adhesive to bond magnets to various surfaces, including wood and plastic. There are a lot of options with the right magnetic compound.

Is It Possible To Use Hot Glue To Bond Magnets?

When it comes to mounting permanent magnets to various surfaces, most forms of strong adhesive or even strong tape will suffice.
You can’t go wrong with magnet adhesives as long as you don’t use hot glue, which employs heat, causing magnets to lose their magnetic properties.


The best glue for magnets is Gorilla 2 Part Epoxy in most circumstances. In addition, you can also choose any suggestion from the mentioned list.

We hope that this advice will assist you in selecting the best adhesive for felt. Thank you for reading!

Related areticle:

Best Glue For Magnets

Leave a Comment