How To Remove Glue Label From Glass?

How To Remove Glue Label

Many users like repurposing glass containers for storing and decoration. Sadly, many of those jars have some stubborn labels left. So, how to remove glue label from glass?

There are two main ways to tackle the problem:

  • Use solvents
  • Use some heat

Each method requires specific tools and ingredients. Today, Glue Care will show you how these methods work and what you need to prepare.

Let’s read on to discover!

What Will You Need?

You can choose one from this list:

  • Vinegar
  • Nail polish remover
  • Baking soda and oil
  • Hair dryer
  • Washing soda

They are available in most households. Just opt for the one you find most convenient.

Step-By-Step Instructions

Once you’ve gathered the necessary tools and ingredients, it’s time to start. Let’s follow the steps in each method.

Vinegar

Vinegar contains acid that can dissolve adhesive. This liquid is also safe to use, thanks to its natural composition.

How to remove sticky label glue from glass jars with vinegar? Please try out these steps:

  • Pour boiling water into a sink. The water should be deep enough to immerse your jar fully.
  • Add some dish soap to loosen the sticker.
  • Pour some cups of vinegar into the mixture.
  • Remove the jar lid and put it in the sink to fill with the mixture and sink to the base.
  • Wait for a few minutes. The longer you leave, the longer it would take the vinegar to break down the adhesive beneath the tag.
  • Remove the jar from the water and peel off the sticker. If any residue remains, try scraping it off with a sponge.
  • Use clean water to rinse your jar and allow it to dry.
 Acid In Vinegar Can Dissolve Glues

Nail polish remover

Acetone is a powerful remover that you can find in nail polish solutions.

Here are the instructions:

  • If the sticker is too hard to peel, soak your jar for about 10 minutes in lukewarm, soapy water.
  • Apply some nail polish remover on a towel or a sponge.
  • If the residue is minor, a paper towel will work. Go for the scrubby sponge if the workload is a lot.
  • Wipe the residue in circular strokes with the towel. The nail polish remover’s compounds will break any adhesive and make it simpler to peel away.
  • Reapply the remover if any residue persists.
  • Use lukewarm, soapy water to clean the jar.
  • After cleaning the jar, dry it before using it for your purpose.
Acetone Is A Powerful Remover

Baking soda and oil

Baking soda is quite familiar to homeowners. It’s a multipurpose powder that can also dissolve adhesive.

When combined with oil, the powder can perform at its best. Here is how the combo works:

  • Remove as much of the sticker as possible.
  • Mix oil and baking soda in equal amounts. Any cooking oil, like olive or vegetable, can work.
  • Pay more attention to the parts with the most residue.
  • Allow 30 minutes for the project to finish. Throughout this duration, the oil will reach and dissolve any adhesive left.
  • Use a scrubby sponge to remove the paste.
  • Clean the jar with water and soap.

Heat

Heat can soften the adhesive, allowing you to peel it easier. We recommend a hair dryer because it’s the handiest to use.

  • Set the dryer to high heat mode.
  • Keep the dryer over the mark for about one minute. The adhesive will dry up and become stiff as a result of the heat.
  • Try to peel from a corner of the tag. If necessary, you can peel with your fingernails or a razor blade.
  • Clean any residue with olive oil, then rinse it with water and soap.
Heat Can Soften Glues

Washing soda

Washing soda (or sodium carbonate) shares some characteristics with baking soda. However, the sodium carbonate is stronger.

You can learn more about the differences between the two kinds of powder via this video.

How to remove glued label from glass using washing soda? Please follow these guidelines:

  • Fill a sink halfway with boiling water. Ensure that the water level is deep enough for your jar to be fully submerged.
  • Add 1/2 cup of washing soda in the sink.
  • Wait about 30 minutes after opening the jar and placing it in the water.
  • Remove the container and peel off the sticker.
  • Scrape stubborn stains with extra washing soda.
  • Rinse the jar with clean water and allow it to dry.

Frequently Asked Questions

Here are some asked questions about removing adhesive labels from glass.

1. Can I peel labels from glass jars with rubbing alcohol?

Rubbing alcohol can readily erase labels. However, it is not an environmentally friendly component.

2. Do vinegar and dish soap damage the glass?

Dish soap with baking soda is safe to use to wipe labels off jars. Don’t worry about applying it on your glass surface.

3. Are the dish soap and vinegar approach for removing labels influential on all containers and stickers?

This combo can work with paper tags from most types of jars. If the sticky labels remain, scrape them off with a mixture of baking soda and oil.

4. Can I use malt vinegar if I don’t have any white vinegar?

Yes. The main difference between these two solvents is that white vinegar only includes water and acid. Meanwhile, the malt vinegar comes with malting barley.

Final Words

Glass is not only durable but also aesthetic. Even if you don’t have anything to keep in the jar, you can use it for home decor.

Removing sticky stains from your jar is simple with the methods we have shared. The ingredients are also easily accessible.

Hopefully, you will find this article helpful. If you need any further information, please feel free to ask. Thank you for reading!

Related article:

How To Remove Glue Label From Glass

Leave a Comment